Doing your laundry is time-consuming enough when everything’s working as it should. However, if your dryer isn’t firing on all cylinders, it can make an already time-consuming process take longer. That, in turn, can increase your frustration.
Fortunately, you can troubleshoot and fix an assortment of problems with your dryer. If these solutions don’t work or if you want to save time, you can find a “wash and fold laundry service near me.” Then, you can hand your laundry off to someone else to take care of, and you won’t have to worry about dryer problems ever again.
Let’s begin by looking at some common problems. Then, find out how you can schedule a wash and fold laundry service.
Dryer Won’t Get Hot
Is your dryer tumbling, but it isn’t getting hot? This is likely due to one of three problems.
First, if you have an electric dryer, it might be a blown household fuse or a tripped circuit breaker. Your dryer uses one household fuse for the tumbler and another for heat. Thus, it can still tumble without getting hot if a fuse is blown. Even though one fuse is still working, you’ll need to reset both circuit breakers or fix both fuses to solve this problem.
Now, if you have a gas dryer, you might have a problem with the supply line valve. Make sure it’s fully open. If it’s not, your dryer might spin, but it won’t get hot.
Finally, it could be a problem with the dryer’s thermal fuse. These fuses can blow during power surges and have to be replaced. Your owner’s manual will show you how to find and replace the thermal fuse.
Dryer Isn’t Tumbling
If your dryer is heating up but not tumbling, it’ll still dry your clothing. However, it will take quite a bit longer, and your clothes will probably be wrinkled when you take them out.
Often, this problem is because the dryer belt needs replaced. You can order a new dryer belt and then replace it yourself. Again, you’ll want to turn to the owner’s manual to find out how to locate and replace the belt.
Dryer Stops Shortly After Starting
You might feel a little perplexed if you turn on your dryer and everything seems fine, but then it shuts off quickly. This can happen due to an issue with the thermal resistor, thermostat, or thermal fuse. Consider using a voltage meter to find the culprit. Then, you can replace the problem part so your dryer will start running again.
Dryer Isn’t Completely Drying Clothes
Does your dryer turn on, heat, and tumble, but it doesn’t completely dry your clothing? It sounds like it’s working, but your clothes feel warm instead of hot when you take them out, and they’re still wet after a full drying cycle.
You probably have a faulty heating element. This prevents the dryer from getting hot enough to dry your clothing during a normal cycle.
You can find a replacement heating element online or at an appliance store. Then, you can remove the back panel on the dryer. Next, you’ll need to remove the connections and install the new heating element. Depending on your dryer, you might need to put the thermostat from the old heating element into the new one, so check your owner’s manual.
If your heating element isn’t the problem, it could be your ductwork. Clogged ductwork will prevent the dryer from heating up all the way. Clean out the ductwork and see if that fixes the issue.
Clean Clothes Are Covered in Lint
This is one of the easiest problems to fix. If your freshly dried clothes are covered in lint, your lint trap is too full. You just need to clean the lint trap and then rewash and dry the clothes. Remember to clean your lint trap often so you won’t have lint-covered clothes. Also, doing so will reduce the risk of other problems, including fires.
Dryer Won’t Start
If your dryer doesn’t start, it could be due to a number of problems. First, make sure that the door latch is fully engaged when closing the dryer. Lint can get stuck in the door latch, preventing it from closing. Clean it and then shut the door and start the dryer. They might fix the problem.
If that isn’t it, check behind the start knob. It could also have a build-up of lint that’s preventing the dryer from starting.
You could also have a problem with your household’s circuit breakers and fuses or the dryer’s thermal fuse. Check them all to make sure they are working.
After you get it back up and running, take some steps to prevent this from happening again. Don’t overload the machine, and clean the lint screen regularly. Also, make sure the ventilation system isn’t blocked. This is a frustrating problem, so you’ll want to avoid it in the future.
Dryer Vibrates and Makes Loud Noises
If your dryer is vibrating or making loud noises, you could have a failed drum seal. You’ll need to remove the old seal and replace it. This takes a bit more work than some of the other DIY projects. However, there are videos on YouTube that go through the process. You can also use your owner’s manual as a guide.
Once you replace it, make sure you don’t overload the washing machine. This can cause the seal to break down, meaning you’ll have to replace it again.
Avoid Dryer Problems With a Wash and Fold Service
While you can fix problems that arise, using a wash and fold service is much easier. You can schedule an online laundry service, and then the company will handle it all for you. You won’t have to worry about your dryer not working, and you will have so much more free time. Plus, you can even save money on laundry thanks to free pickup and delivery and affordable pricing.
Download the app from the App Store or Google Play. Then, schedule your service and kick back and relax. You won’t have to worry about dealing with laundry problems again.
Sources:
https://www.thespruce.com/what-is-wrong-with-my-dryer-2145961
https://tidecleaners.com/en-us/blog/Common-Dryer-Problems-and-How-to-Fix-Them
https://www.cnet.com/home/smart-home/common-clothes-dryer-problems-and-how-to-fix-them/
